Zanussi ZWC1301, User Manual

Page: 22 / 28

Problem Possible cause/Solution
Spinning starts late or
appliance does not
spin:
• Add more items, redistribute the load manually and then select the
spinning programme.
No water is visible in
the drum:
• Appliances based on modern technology operate very economically
using very little water without affecting performance.
After the check, activate the appliance. The
programme continues from the point of interruption.
If the problem occurs again, contact the Authorised
Service Centre.
The necessary data for the service centre is on the
rating plate.
CONSUMPTION VALUES
INTRODUCTION
See the web link www.theenergylabel.eu for detailed informa-
tion about Energy Label.
The QR code on the energy label supplied with the appliance pro-
vides a web link to the information related to the performance of
the appliance in the EU EPREL database. Keep the energy label
for reference together with the user manual and all other docu-
ments provided with this appliance.
It is also possible to find the same information in EPREL using the
link https://eprel.ec.europa.eu and the model name and prod-
uct number that you find on the rating plate of the appliance. Refer
to 'Product description' chapter for the position of the rating plate.
LEGEND
kg Laundry load. h:mm Programme duration.
kWh Energy consumption. °C Temperature in the laundry.
Litres Water consumption. rpm Spin speed.
% Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is
the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different conditions (e.g. room
temperature, water temperature and pressure, load size and type of laundry, supply volt-
age) and also if you change the default setting of a programme.
22