• Screw off the pivot of the lower hinge (5) and
screw the lower hinge pivot (6) into the left
drill of the lower hinge.
5
6
• Screw off the screws of the lower hinge and
remove the hinge. (8)
• Screw off the lower cover plugs and screw
them into the hole on the opposite side. (7)
• Put the lower hinge on the opposite side and
fix it with the screws. (8)
7
8
• Place the lower door on the lower hinge piv-
ot. (9)
• Screw off the middle cover plugs and screw
them into the hole on the opposite side. (10)
• Put the middle hinge on the opposite side
and fix it with the screws. (11)
10
9
180
o
11
• Place the upper door on the middle hinge
pivot. (12)
• Fix the door with upper hinge and fix it with
screws of it. (13)
12
13
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow
back in the compressor.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the cabi-
net. In that case, wait for the natural fitting of the
gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest After
Sales Service Force. The After Sales Service
specialist will carry out the reversibility of the
doors at your cost.
Technical data
Dimension
Height
1845 mm
Width
595 mm
Depth
642 mm
Rising Time
18 h
Voltage
230-240 V
Frequency
50 Hz
13
www.zanussi.com
Summary of Contents for ZRB34211WA
Page 1: ...EN User manual Fridge Freezer ZRB34211WA...
Page 15: ...15 www zanussi com...