6. Turn the knob for the oven functions to the
off position.
Setting the TIME DELAY function
1. Set an oven function.
2. Press again and again until
starts to
flash.
3. Press or to set the minutes and the
hours for DURATION time.
4. Press to confirm. The display shows
flashing
.
5. Press or to set the hours and the
minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on, works
for the set DURATION time and stops at the set
END time. At the set time an acoustic signal
sounds for 2 minutes.
and time setting flash
in the display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions to the
off position.
Setting the MINUTE MINDER
1. Press again and again until and "00"
flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the minutes.
When the time you set is longer than 60
minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts automatically
after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic signal
sounds for 2 minutes. "00:00" and flash
in the display. Press any button to stop the
acoustic signal.
COUNT UP TIMER
To reset the Count Up Timer, press and hold
and . The timer starts to count up again.
Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Deep pan:
Push the deep pan between the guide bars of
the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars of
the shelf support and the wire shelf on the
guide bars above and make sure that the feet
point down.
10
www.zanussi.com
