screen-printing zones is not rough when you
touch it.
A
B
Make sure that you install the middle panel of
glass in the seats correctly.
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
CAUTION!
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
Possible cause
Remedy
You cannot activate or operate
the oven.
The oven is not connected to an
electrical supply or it is connec-
ted incorrectly.
Check if the oven is correctly
connected to the electrical sup-
ply (refer to the connection dia-
gram if available).
The oven does not heat up.
The oven is deactivated.
Activate the oven.
The oven does not heat up.
The clock is not set.
Set the clock.
www.zanussi.com
21
Summary of Contents for ZOP37972
Page 1: ...EN ZOP37972 User Manual Oven ...
Page 26: ...26 www zanussi com ...
Page 27: ...www zanussi com 27 ...