16
4.3 - Installation of the
chimney A
No matter which type of installation is
being used, any wooden shelves in the
area where the hood is to be fitted must
first be removed, drilled and later
replaced.
1 - Drilling the shelves:
a) Using the cardboard template provided,
and taking hole “
B
” as a point of reference,
drill the shelves along the central axis to
allow the passage of the chimney. The
chimney must be inserted into the shelves
before it is fixed to the hood canopy
C
(
fig.
12
).
b) When installing the ducting version with
the air outlet directed upwards, if the
ducting fan unit is positioned below the
line of shelves it will be necessary to drill a
suitable hole in the top shelf only, to allow
the air ducting pipe to pass through
(
fig. 13
).
2 - Direction and position of the ducting
fan unit
a) The hood is normally supplied with the air outlet directed towards
the wall (
fig. 3
), if it is to be installed
with the air outlet directed to the
right or left (
fig. 4a-b
), it will be
necessary to change the direction of
the ducting fan unit,
proceeding as follows:
- Unscrew the screws
U
(
fig. 14
);
- Turn the ducting fan unit 60
°
to
the right or left;
- Replace the screws
U
.
b) The ducting fan unit air outlets
must be arranged according to the
type of installation to be carried
out.
· Air outlet directed upwards
(
fig. 2a-b
).
- Remove the plastic plug from the upper part of the venting grill and
replace it on the rear part (
fig. 15
).
· Air outlet directed towards the wall (
fig. 3
).
- Remove the plastic frame from the air outlet (
fig. 16
).
U
U
A08_14
14
S07_22
15
S07_14
16
A03_12
12
A03_13
13
