1
2
A
3
Put the detergent or
the tablet in compart-
ment (
A
).
A
B
If the programme has
a prewash phase, put
a small quantity of de-
tergent in compart-
ment (
B
).
4
Detergent tablets do not fully dissolve with
short programmes and detergent residues
can stay on the dishes.
We recommend that you use detergent tablets
with long programmes.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to ac-
cept some operations.
The appliance is in setting mode when, after the
activation:
• All the programme indicators come on.
If the control panel shows other conditions,
press and hold function buttons (
B
) and (
C
) at
the same time until the appliance is in setting
mode.
Starting a programme without delay start
1. Open the water tap.
2. To set a programme, keep the appliance
door ajar.
3. Press the on/off button to activate the appli-
ance.
4. Make sure that the appliance is in setting
mode.
5. Press the button of the programme you
want to set.
• The programme duration flashes in the
display.
• The related programme indicator comes
on.
• The wash indicator comes on.
6. Close the appliance door. The programme
starts.
• The display shows the programme dura-
tion that decreases with steps of 1 mi-
nute.
• The wash indicator stays on.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until
the display shows the delay time you want
to set (from 1 to 19 hours).
• The delay time flashes in the display.
• The wash indicator goes off.
3. Close the appliance door. The countdown
starts.
• The display shows the countdown of the
delay start that decreases with steps of 1
hour.
• When the countdown is completed, the pro-
gramme starts.
– The wash indicator comes on.
– The display shows the programme dura-
tion.
9
www.zanussi.com
Summary of Contents for ZDF 4010
Page 1: ...EN User manual Dishwasher ZDF 4010 ...
Page 15: ...15 www zanussi com ...
