Manual adjustment
1
2
Turn the water hard-
ness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND START-
ING A PROGRAMME’.
2. Press and hold function buttons (
B
) and (
C
)
at the same time until the indicators above
function buttons (
A
), (
B
) and (
C
) start to
flash.
3. Press function button (
A
).
• The indicators above function buttons (
B
)
and (
C
) go off.
• The indicator above function button (
A
)
continues to flash.
• The display shows the current setting of
the water softener, e.g.
= level 5.
4. Press function button (
A
) again and again to
change the setting.
5. Deactivate the appliance to confirm the set-
ting.
Filling the salt container
Caution!
Only use dishwasher salt. Other
products can cause damage to the
appliance.
Water and salt can come out from the salt
container when you fill it. Risk of corrosion. To
prevent it, after you fill the salt container, start a
programme.
1
2
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
4
5
6
Filling the rinse aid dispenser
Caution!
Only use rinse aid for
dishwashers. Other products can cause
damage to the appliance.
The rinse aid, during the last rinsing phase,
helps to dry the dishes without streaks and
stains.
7
www.zanussi.com
Summary of Contents for ZDF 4010
Page 1: ...EN User manual Dishwasher ZDF 4010 ...
Page 15: ...15 www zanussi com ...
