3
To remove filters (
B
)
and (
C
), turn the han-
dle counterclockwise
and remove. Pull
apart filter (
B
) and
(
C
). Wash the filters
with water.
A
4
Remove filter (
A
).
Wash the filter with
water.
D
A
5
Put filter (
A
) to its ini-
tial position. Make
sure that it assembles
correctly under the
two guides (
D
).
6
Assemble filters (
B
)
and (
C
). Put them into
position in filter (
A
).
Turn the handle
clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and damage to
the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, re-
move remaining parts of soil with a thin pointed
object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
Troubleshooting
The appliance does not start or it stops during
operation.
Before you contact the Service, refer to the in-
formation that follows for a solution to the prob-
lem.
With some problems, the display shows
an alarm code:
•
- The appliance does not fill with water.
•
- The appliance does not drain the wa-
ter.
•
- The anti-flood device is on.
Warning!
Deactivate the appliance before
you do the checks.
Problem
Possible cause
Possible solution
The programme does not
start.
The mains plug is not connected in
the mains socket.
Connect the mains plug.
11
www.zanussi.com
Summary of Contents for ZDF 4010
Page 1: ...EN User manual Dishwasher ZDF 4010 ...
Page 15: ...15 www zanussi com ...
