background image

Contents

Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _  3
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  11
Technical information _ _ _ _ _ _ _ _ _ _ _ _  14
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _  14

Subject to change without notice.

 Safety 

instructions

Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and dam-
ages. Always keep the instructions with the ap-
pliance for future reference.

Children and vulnerable people safety

Warning!

 Risk of suffocation, injury or

permanent disability.

• Do not let persons, children included, with re-

duced physical sensory, reduced mental
functions or lack of experience and knowl-
edge use the appliance. They must have su-
pervision or instruction for the operation of
the appliance by a person who is responsible
for their safety. Do not let children play with
the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appli-

ance door when it is open.

Installation

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C.

• Obey the installation instruction supplied with

the appliance.

Water connection

• Make sure not to cause damage to the water

hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.
Old hose sets must not be reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time, let
the water flow until it is clean.

• The first time you use the appliance, make

sure that there is no leakage.

Electrical connection

Warning!

 Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power supply.
If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the
Service or an electrician to change a dam-
aged mains cable.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

Use

• This appliance is intended to be used in

household and similar applications such as:

– Staff kitchen areas in shops, offices and

other working environments

2

 

www.zanussi.com

Summary of Contents for ZDF 4010

















Reviews: