In case of absence of the electricity you can ignite
the oven burner without an electrical device.
1. Open the oven door.
2. Hold the flame near the hole in the bottom of
the oven cavity.
3. At the same time push the knob for the oven
functions and turn it counterclockwise to the
maximum gas flow position.
4. When the flame comes on, keep the knob for
the oven functions pushed on the maximum gas
flow position for 15 seconds or less to let the
thermocouple warm up.
Do not keep the knob for the oven
functions pushed for more than 15
seconds. If the oven burner does not
light after 15 seconds, release the
knob for the oven functions, turn it into
off position, open the oven door and
try to light the oven burner again after
minimum 1 minute.
AFTER IGNITING THE OVEN GAS BURNER
1. Release the knob for the oven functions.
2. Close the oven door.
3. Turn the knob for the oven functions to set the
necessary heat setting.
Control the flame trough the holes in the bottom of
the oven.
TURNING OFF THE OVEN BURNER
To put out the flame, turn the knob to the off
position .
USING THE GRILL
CAUTION! Always keep the appliance
door closed when the grill operates.
Do not put the meat directly on the
tray or pan.
CAUTION! Do not put the meat on
the highest shelf level. There is a risk
of fire.
1. Open the oven door.
2. Ignite the grill burner.
• For manual ignition hold a flame near the
grill burner holes. Push and turn the knob
for the grill to the flame position. Hold the
knob pushed down.
• For ignition on the spark generator button
push and hold the spark generator button.
Push and turn the knob for the grill to the
flame position. Hold the knob pushed.
Release the spark generator button when
burner lights.
3. Hold the knob for the grill pushed for
approximately 15 seconds.
4. Release the oven control knob.
The grill temperature can be adjusted. To lower
the temperature turn the knob for the grill
counterclockwise.
If the grill does not come on or if it accidentally
goes out release the knob for the oven
functions and turn it to the Off position. Open
the oven door. After one minute, try to light the
grill again.
5. Preheat the grill for 5 to 10 minutes.
6. Put the oven shelf with the meat on shelf
position 3.
7. Put a baking tray or roasting pan below, on
shelf position 2, to collect the juices.
If there is temporarily no power supply open the
oven door hold a flame near the grill burner holes
and turn the knob for the gas to the flame position.
TURNING OFF THE GRILL BURNER
To put out the flame, turn the knob to the off
position .
11
