7
Hints and tips
This function is used to adjust finish time of the
cooking period.
• Do not overfill pans or they will boil over.
• Do not use pans with very heavy handles, which
cause the pan to tip.
Place pans on the centre of the burners. Position
pans so the handles cannot be accidentally knocked
or overhang the appliance. Lift pans on and off the
pan supports. Do not slide them across the hob.
• Do not leave accidental spillage on the hob or
removable parts. The spillage should be wiped up
and the parts washed and carefully dried as soon
as the hob, pan supports and burner parts are cool
enough to touch.
• A flat-based Wok will stand stable on the pan
supports. If you use a round Wok with a collar
support, the collar must be the open wirework type
otherwise the performance of the burner will be
affected.
Take care to avoid burns and scalds when reaching
across the hotplate.
Take extra care when deep fat frying, do not cover
the pan with a lid. Do not leave a pan unattended. If
the pan catches fire, leave it where it is and turn off
all controls. Place a damp cloth or a fitting lid over the
pan to smother the flames. Never put water on the
fire. Leave to cool for 30 minutes.
Gas flame safety device (FSD) is used for cutting off
the gas feed to the burners in case the flames are
accidentally put out by wind, overflowing liquids, etc.
To activate this feature, press the knob during
ignition, and when the ignition occurs, keep it pressed
for 5 seconds, but no longer than 10 seconds. When
the flame is accidentally put out, the device will cut
out the gas flow.
!
WARNING!
!
WARNING!
!
WARNING!
!
WARNING!
IMPORTANT!
The grill
!
CAUTION!
Accessible parts may be hot when the grill is in use.
Young children should be kept away.
When you first operate the grill you may hear some
sounds as the burner heats up, this is quite normal
and is not a fault on the appliance.
Using the grill
Fully open the door before lighting the grill.
Keep the control knob depressed for up to 5 seconds,
but no longer than 10 seconds. After this time release
the controls. The flame should remain alight. If after
10 seconds the burner is not lit, stop operating the
appliances and wait at least 1 minute before attempt-
ing a further ignition of the burner.
When the burner has lit release the control and
Push in and hold the
control knob, turn to the
large flame symbol
(highest setting).
Press the ignition button
immediately.
