Downloaded from www.vandenborre.be
Warning! Do not use abrasive cleaners, steel wool
pads or acids, they can cause damage to the
appliance.
• To clean the enamelled parts, cap and crown, wash it
with warm soapy water.
• Stainless steel parts wash with water, and then dry with
a soft cloth.
• The pan supports are not dishwasher proof; they must
be washed by hand.
• Make sure you position the pan supports correctly after
cleaning.
• To make burners work correctly, make sure that the
arms of the pan supports are in the centre of the burn-
er.
• Be very careful when you replace the pan supports to
prevent the hob top from damage.
After cleaning, dry the appliance with a soft cloth.
Oven - Daily Use
Warning! Refer to "Safety information" chapter.
Oven Functions
The oven has these functions:
Oven function
Application
Off position
To switch off the appliance.
Maximum gas supply
To adjust the oven temperature - highest setting.
Pizza
To make pizza.
Minimum gas supply
To adjust the oven temperature - lowest setting.
Gas oven cooking
Ignition of the oven gas burner:
1. Open the oven door.
2. Hold a flame near the hole in the bottom of the oven
cavity.
3. At the same time push the knob for the oven functions
down and turn it counter-clockwise to the maximum
setting.
4. When the flame comes on, keep the gas oven control
knob pushed for approximately 15 seconds.
After ignition:
1. Release the knob.
2. Close the oven door.
3. Turn the knob for the oven functions to the necessary
setting.
Oven safety device:
The oven has a thermocouple. It stops the gas flow, if the
flame goes out.
If the oven gas burner does not come on or if it ac-
cidentally goes out:
1. Release the knob for the oven functions and turn it to
the off position.
2. Open the oven door.
3. After one minute, try to light the burner again.
23
