Downloaded from www.vandenborre.be
3
2 2
5
Use a spatula made of
wood or plastic or equiva-
lent to open the inner
door.
Hold the outer door, and
push the inner door
against the top edge of the
door.
6
Lift the inner door.
7
Clean inner side of the
door.
Clean the glass panel with
water and soap. Dry it
carefully.
Warning! Only clean the glass panel with water and
a soap. Abrasive cleaning agents, stain removers
and sharp objects (e.g. knives or scrapers) can cause
damage to the glass.
Inserting the door and the glass panel
When the cleaning procedure is completed, insert the
oven door. To do so, do the steps in opposite way.
4
4
5
5
6
What to do if…
Problem
Possible cause
Remedy
The flame is blown out immediately
after ignition.
The thermocouple is not heated suffi-
ciently.
After lightning the flame, keep the
knob pushed for approximately 5
seconds.
The gas ring burns unevenly.
The burner crown is blocked with
food residue.
Make sure that the injector is not
blocked and the burner crown is clear
of food particles.
The oven does not heat up.
The oven is not activated.
Activate the appliance.
The oven does not heat up.
The necessary settings are not set.
Control the settings.
Steam and condensation collect on
the food and in the oven.
You left the dish in the oven for too
long.
Do not keep the dishes in the oven
for longer than 15-20 minutes after
the cooking ends.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
28
