37
How to clean the oven guides
In order to clean the guides properly, dismantle
them from the oven sides.
To do so, proceed as follows:
1.
unscrew the fastening screws at the front of
the guides while holding the guide in position
with one hand;
2.
remove the guide by detaching the rear hook
from the hole placed in the rear of the oven;
3.
repeat the same operation to remove the guide
on the opposite side;
4.
clean the guides with non abrasive detergents
and dry them carefully with a soft cloth;
5.
replace the guides by repeating the operations
described above in the reverse order.
Be sure to tighten the fastening screws properly
when you replace the guides.
It is possible to remove the telescopic
runners only, unlocking the elements as
shown on page 27.
The telescopic runners must not be cleaned
in the dishwasher.
Do not attempt to remove the
telescopic runners until the oven has
cooled down.
Do not pull out the telescopic runners
to remove them from the side rails.
Sharp edges could cause injuries.
)
Cleaning the oven door seal
A seal is fitted to the opening of the oven.
Check the condition of the seal
regularly. Clean the seal when
necessary, without using abrasive
objects or substances. If you notice
that the seal is damaged, contact the
closest Customer Service
immediately. Do not use the oven
until the seal has been replaced.
