background image

6

MAINTENANCE AND CLEANING

Before carrying out any maintenance or
cleaning isolate the cooker hood from the
mains supply.

The cooker hood must be kept clean, a build
up of grease or fat can be a fire hazard.

External Cleaning

The metal casing, grille and visor should be cleaned at
least  once  a  month  to  keep  it  looking  like  new.  Wipe
over the hood with a soft cloth wrung out in mild soapy
water and then dry thoroughly.

Never use scouring pads or abrasive cleaners as they
may scratch or damage the surfaces.

Always wear protective gloves when cleaning
the hood.

Never use scouring pads or abrasive cleaners.

Never use excessive amounts of water when
cleaning particularly around the control panel.

Metal Grease Filters

The metal grease filters should be cleaned at least every
month. The filters may be washed by hand using mild
soapy  water,  or  they  can  be  machine  washed  in  a
dishwasher.

To remove the grease filter cassette

1.

Open the visor.

2.

Press  inwardly  on  the  two  slide  catches  and
remove.

Charcoal Filter

The charcoal filters cannot be cleaned. The filter should
be  replaced  at  least  every  three  months  or  more
frequently if the hood is used more than three hours per
day.

Summary of Contents for TH 500





















Reviews: