Page. 4
LMV5000.EN202001V6
Always switch off the main switch and make sure that it cannot be switched on when
performing any activity on the system!
In case of fire or any other emergency:
•
When accessible close the gas valve (A1) of the gas train and switch
off the main switch on the burner panel.
•
When there’s a fire in the boiler room you need to switch off the
electric power using the “fire switch” mounted on the wall outside the
boiler room.
3.1 Maintenance
To assure the safe and proper operation of the burner, it is recommended that the
burner be inspected and serviced at least once a year by a qualified service
engineer.
Never perform any maintenance or any other activity on the burner (system) without
adequate knowledge and understanding of the system.
Remarks:
-
De burner system is supplied according to applicable safety regulations, but it is
the end
user’s responsibility to ensure safety through annual maintenance work
on the system, according to applicable regulations.
-
To ensure the good operation of the heating system, the boiler room has to be
kept clean. It may not be used for storage purposes. The parts which may need
maintenance work need to be accessible at all times.
-
Keep the air supply grille and air extraction openings free and clean. Inadequate
air ventilation can lead to hazardous situations.
-
The boiler room has to be illuminated using mounted electrical lighting, to make
sure that all parts of the system can be properly maintained even without daylight.
-
Any water leaks have to be repaired immediately.
-
If you have any doubts concerning the control or operation of the system, please
contact your burner technician or supplier.
3.2 Instruction manual instructions
To understand this manual better you need to know which type of burner has been
installed (TR or RKB) and which type of system it controls. This information is
provided on the nameplate on the right-hand side of the burner.
Summary of Contents for RKB
Page 29: ...Page 29 LMV5000 EN202001V6...
