24
3. Operation Instructions
☞
Timer Unsetting
(10)Parameters Setting
◎
Press and
at
the
same
time
to enter the parameters setting when the unit is
standby. The screen will display the twinkling serial number of the parameters
after entering the parameters setting. Press and to select and press
to
confirm
the
serial
number
of
parameter
you
want
to
change
and
set
the
corresponding
parameter
with
and
.
The
system
will
be
back
automatically
to
the
serial
number
setting
if
there
is
no
instruction
in
10
seconds
after
setting the
parameter and will quit the parameters setting if there is no instruction in 10 seconds.
In order to save and back, press after setting a parameter or serial number.
Pressing button
and
set
the
timer
to
zero
to
cancel the
timer
.
and
Parameter 1 press
“ ” or “ ” to select
other parameters.
After reaching the
parameter that
need to be changed
Press to activate the
setting of the choosing
parameter. Value of this
parameter will be shown
on the display.
Value of the parameter.
Can be adjusted by ”
or ”. Confirm the setting
by pressing ”.
“
“
“
Press
two times within 3 seconds after power the unit, unit will enter into self-checking
mode. It will power water valve 1 (EV1) and valve 2(EV2) in sequence.
Unit will quit self-checking function automatically in 10 seconds. But unit will only recover to
standard working mode after repower the unit.
（
9
）
Self-checking
Summary of Contents for SLIM-C Series
