ZANTIA SLIM-C Series, Instruction Manual, Page: 16 / 40

13
2. Installation
3
4
5
Mount the unit on the
metal expansion bolts
Fasten the
expansion bolts
in each side
6
Use two
scerws
to fix the unit in
lower side
Fasten the unit
by scerws
OK!
2
1. After a suitable place for installation is selected, the unit must be fastened to the wall
in place by two expansion bolts in each side. To fasten the unit to a wooden wall, use
suitable bolts.
2. Mark on the wall where the mounting holes will be drilled. Drill the wall with a power
drill. Put the
∮
8 expansion bolts in the holes, mount the gasket on expansion bolt to
avoid the touching between unit and wall.
3. Mount the unit on the expansion bolts(refer fig. 3) and position the unit properly using
a level , so that it slightly tilt to the area of water discharge for good condensate
dirainage
.