ZANTIA SLIM-C Series, Instruction Manual, Page: 19 / 40

16
2. Installation
Note: To connect the water inlet/outlet of the unit to water pipe, it's necessary to use a
spanner to fix the water inlet/outlet, and use another spanner to screw up the
connector of water pipe into the water inlet/outlet. Don't use only one spanner to do
this operation, otherwise the water pipe of the unit would be damaged by turning round.
4
5
6
1
2
3
1.Take off the sealing cover of water inlet/otulet pipe .
Installation steps:
2.
inlet/outlet water pipe
.
Choose the water pipe in proper length to connect the unit to water system.
Connect the unit to water system, Stainless steel corrugated pipe are recommended for the
Take off the
sealing cover
1
2
Take off the
sealing cover
Note: The gasket seal must be put on the connector jointing, then fasten the screws
nuts by spanner , to make sure there is no leakage in the joint.
For the models with 4 connectors 3-way valve: