ZANTIA NARA PLUS 15, Use And Maintenance Manual

Page: 51 / 68

51 Mod. NARA PL. 15-20 rev 01
Instructions for use
translated from the original text
IT IT
FR FR
ES ES
EN EN
H e a t i n g
m a n a g e -
ment *
B o i l e r
T h e r m o -
stat
Menu to modify the Boiler
Thermostat value.
P u f f e r
T h e r m o -
stat
Menu to modify the Puffer
Thermostat value. It can only
be viewed if a puffer is instal-
led in the system and if the
menu is enabled
Summer-
winter
Menu that allows for Summer
- Winter selection
Mixer Val-
ve
Menu to manage Mixer Val-
ve operation. It can only be
viewed if a mixer valve is in-
stalled in the system and if the
menu is enabled
R e m o t e
control pa-
nel **
Room Ther-
mostat
Menu to modify the value
of the Remote control panel
Room Thermostat.
Enabling
It allows for the activation/
deactivation of Room Ther-
mostat operation. It can only
be viewed if the menu is ena-
bled. (it can only be modified
by technical personnel)
Chrono
Menu to select the program-
ming mode and the switch-on
and switch-off time slots.
Manual load
*
Menu for manual loading of
the Auger
Reset service *
This menu allows you to reset
the system Maintenance Ope-
ration message
* Options only available on the local control panel
** Options only available on the remote control panel
4.2.3 COMBUSTION MANAGEMENT MENU
Menu to modify the system combustion parameters. It com-
prises of a number of sub-menus.
4.2.3.1 PELLET POWER
Menu that allows you to set system combustion management
in Pellet operational mode. You can choose between automa-
tic and manual mode (in this case, you may also set the po-
wer).
Combustion Description
1 – 5
Power regulated in manual mode from
1 to 5
Auto
Power regulated automatically by the
system
4.2.3.2 AUGER CALIBRATION
Menu to modify the work time or the auger speed.
There are 10 available steps from -5 to +5 with the system
being pre-set to 0.
4.2.3.3 COMBUSTION FAN CALIBRATION
Menu to modify the speed of the combustion fan.
There are 10 available steps from -5 to +5 with the system
being pre-set to 0.
Fan calibration
Max: 5
Set: 0
Min: -5
Pellet power
Auger calibration
Fan calibration
Combustion management
Heating management
Chrono
Manual load
Reset Service