Vesta VRC-100 Installation Manual Download | Manualshive

Page: 1 / 64

background image

REVOLUTION CONDENSING

COMBI-BOILERS

Installation

Manual

Keep this manual near this boiler for future reference

whenever maintance or service is required.

READ ALL OF THE INSTRUCTIONS THOROUGHLY BEFORE OPERATING THIS BOILER.

This manual provides information on the installation of the boiler. For proper operation and safety, it is important to

follow the instructions and adhere to the safety precautions.
A licensed professional must install the boiler according to the exact instructions of the manual.

Warning

If the information in these instructions is not followed exactly, fire or explosion

may result causing property damage, personal injury, or death.

-

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

-

What to do if you smell gas

•  Do not try to light any appliance.
•  Do not touch any electrical switch; do not use any phone in your building.
•  Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•  If you cannot reach your gas supplier, call the fre department.

- Installation and service must be performed by a licensed professional.

The installation must conform with local codes or, in the absence of local codes, the National Fuel

Gas Code, ANSIZ223.1/NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.

Model

VRC-80 VRC-100

VRC-120 VRC-140

1
2
3
...
»

Summary of Contents for VRC-100

































































Reviews:

No comments

Related manuals for VRC-100

Naviels UKDAX-10EDT

Brand: DAXOM Pages: 47

Brand: Keston Pages: 8

WBS Active seried

Brand: Sun System Pages: 16

Brand: EASCO Pages: 46

Brand: Wells Pages: 30

Brand: Ariston Pages: 64

Brand: SCHUSTER Pages: 40

Brand: Ideal Boilers Pages: 8

Brand: DS Stoves Pages: 12

Concord CXD 40-100

Brand: Ideal Boilers Pages: 40

Classic FF 250 P

Brand: Ideal Boilers Pages: 40

Brand: Galmet Pages: 25

Brand: Weishaupt Pages: 90

Brand: Zip Pages: 12

ECOflo EC230/600

Brand: andrews Pages: 52

Brand: Vetus Pages: 20

KSC 4 Series KSC-3090S

Brand: ECR Pages: 24

Brand: Maga Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands