Zanotti GS Series, Use And Maintenance Instructions

Page: 26 / 84

26
8.2 Icons Display
ALARMS
Permanently on: alarm present
Blinking: alarm acknowledged
Off: otherwise
ON/OFF
Permanently on: the machine is OFF
Off: the machine is ON
MENU’ COMPRESSOR
Permanently on: parameters edit lock Permanently on: compressor active
Blinking: navigation of menus in progress Blinking: delay, protection or start blocked
Off: otherwise Off: otherwise
DEFROST
FANS
Permanently on: defrost active Permanently on: evaporator fans active
Blinking: dripping Blinking: fans forced manually or from D.I.
Off: otherwise Off: otherwise
°F
°C
Permanently on: displays of values in °F Permanently on: displays of values in °C
Off: otherwise Off: otherwise
LIGHT
NOT USED
Accesa fissa: the room light is ON
Off: otherwise
NOT USED NOT USED
NOT USED NOT USED
NOTES:
When the controller is powered on it performs a lamp test, during which time the display and LEDs will
Flash for several seconds to check that they all function correctly.
If the room light is on, the “Light” icon will be permanently on and the display shows alternately the room
temperature value and the word ON.
ATTENTION
If the keyboard is not recognized, the display shows E8.
If happens, check the state and the correct insertion of the flat on the connector of the
display card. If the flat is good, replace the polycarbonate front panel.
DEFROST
Press for at least 3 sec
Activates the Manual Defrost function
PARAMETERS EDIT LOCK
Press the 2 keys at the same time for at least 3 secs for disabling the access to the
Programing menù.
To disable the keypad lock, repeat the above-mentioned procedure.