23
6.6
Fitting the remote panel:
Fix the back plate to the wall using the pre-drilled holes; be careful the panel is kept in a vertical position.
Fit the connecting cable between panel and unit making sure not to bundle it with other cables.
ATTENTION
Maximum distance betw een panel and unit is 10 mt. For longer distances the special
“long distance module” should be used.
ATTENTION
Check that the unit and its devices have suffered no damages during transport. Pay
special attention to the components secured to the electric panel door and to the
refrigerating circuit pipes. Mount the unit as show n in the draw ings; make sure that
the electric connections are carried out properly.
6.7
Safety devices
The following
mechanical safety devices
are supplied:
1.
Fixed front and side protections for evaporator and condensing unit,
secured by locking screws.
2.
External fan protections placed on the evaporating unit, secured with screws.
The following
electrical safety devices
are supplied:
a.
Protection of fans (belonging to motors) against high power absorption; with automatic reset.
b.
High pressure switch (only for special components) to protect against excessive pressure; with
automatic reset.
WARNING
Above devices have been developed to safeguard the operator’s safety.
6.8
Cleaning
Clean the unit carefully. Remove any dust, foreign substances and dirt possibly deposited during handling.
Use detergents and degreasers.
ATTENTION
Solvents are not allowed.
Summary of Contents for GS Series
Page 83: ......