56
Instruction for the user
Installation
Installation and initial adjustment of your oven
MUST be carried out by qualified personnel
in compliance with current regulations.
Specific installation instructions for the
installer are given in this booklet.
Initial operation of the appliance
Before using the appliance, carefully remove
the special protective film covering the
stainless-steel and anodised aluminium parts.
Clean the oven and its accessories with water
and detersive. Insert the trays and the grill
into their respective runners. Warm the oven
(EMPTY), to maximum heat, for about an hour
with the selector knob in the
and
position, then for about 15 minutes in the
position. The smell that is set free cannot be
avoided. It is formed on the outside of the
oven chamber and will completely disappear
when the oven has been used a few times.
During oven cooking and grilling, the
appliance door and the surrounding parts are
warmed up to a very high temperature. Be
careful and keep children away from the
appliance while you are using it. When you
connect other appliances to a plug near the
oven, check carefully that the wire does not
touch warm parts of the oven and does not get
taken in the oven door.
OVEN DOOR PROTECTION DEVICE
All our appliances comply with the European
Safety Standards. Nevertheless, in order to
ensure the highest safety level, and avoid little
children to be exposed to the heat when the
appliance is operated, it is possible to fit a
special protection device to the oven door. This
device can be purchased in our Service Force
Centres, specifying the relevant code ( 3 5 7 9 1 )
and the Product No. shown on the rating plate.
Fitting instructions are provided with the kit
package.
