Activating and deactivating
Touch
for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the
hob,
• you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol
comes
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time
comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
The hob deactivates af-
ter
, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hour
The heat setting
Touch
to increase the heat setting. Touch
to
decrease the heat setting. Touch
and
at the
same time to deactivate the cooking zone.
Power function
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to “Technical information” chapter.
To activate the function for a cooking zone: touch
.
comes on.
To deactivate the function: touch
or
.
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the heat setting for the cooking zone then set
the function.
To set the cooking zone: touch
again and again
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
or
of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch
. The remaining time counts back to
00. The indicator of the cooking zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
.
Minute Minder
You can use this function as a Minute Minder when the
hob is activated and the cooking zones do not operate.
The heat setting display shows
.
To activate the function: touch
. Touch
or
of the timer to set the time. When the time comes to an
end, the sound operates and 00 flashes.
To stop the sound: touch
.
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate to the
lowest heat setting.
When the function operates, you cannot change the
heat setting.
The function does not stop the timer functions.
22