2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of food or soil
in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure that it
is correctly positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn it
clockwise until it locks.
Caution! An incorrect position of the
filters can cause bad washing results
and damage to the appliance.
Cleaning the lower spray arm
We recommend to clean the lower spray arm regularly
to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use a
thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it downwards.
16
