How to fill the rinse aid dispenser
A
B
C
Caution! The compartment (B) is for
rinse aid only. Do not fill it with detergent.
Caution! Only use rinse aid designed
specifically for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid reaches the
marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into
position.
Fill the rinse aid dispenser when the
indicator (A) is clear.
Daily use
1. Open the water tap.
2. Press and hold
until the appliance is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme is
complete.
Using the detergent
A
B
C
Caution! Only use detergent specifically
designed for dishwashers.
1. Press the release button (A) to open the lid (C).
2. Put the detergent (gel, powder or tablets) in the
compartment (B).
3. If the programme has a prewash phase, put a small
quantity of detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid locks into
position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
The upper ends of the two vertical ribs
inside the compartment (B) indicate the
maximum level for filling the dispenser
with gel (max. 30ml).
How to select and start a programme
1. Press the button dedicated to the programme you
want to set.
The light related to the button flashes.
2. Activate Extra power if desired.
3. Close the appliance door to start the programme.
How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent option
and must be activated every time before
you start a programme.
12
