Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to EN60436), send an
email to:
[email protected]
In your request, include the product number code (PNC)
from the rating plate.
For any other questions regarding your dishwasher,
refer to the service book provided with your appliance.
Basic settings
You can configure the appliance by changing basic
settings according to your needs.
Number
Settings
Values
Description1)
1
Water hardness
From level 1 to lev-
el 10 (default: 5)
Adjust the level of the water softener according to the
water hardness in your area.
2
Rinse aid level
From level 0 to lev-
el 6 (default: 4)
Adjust the level of the rinse aid according to the neces-
sary dosage.
3
End sound
On
Off (default)
Activate or deactivate the acoustic signal for the end of
a programme.
4
Auto door open
On (default)
Off
Activate or deactivate the AirDry.
5
Key tones
On (default)
Off
Activate or deactivate the sound of the buttons when
pressed.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
When the appliance is in setting mode, the indicators on
the control panel represent available settings. For each
setting, a dedicated indicator flashes:
1
3
2
4
5
Setting mode
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode while the
programme is running.
To enter setting mode, press and hold simultaneously
30min and ECO for about 3 seconds.
• The light related to
and the indicator
flash.
• The indicators
,
and
are on.
• The lights related to the programme buttons
are on.
How to navigate in setting mode
You can navigate in setting mode using programme
buttons.
B
A
C
A. Previous button
B. OK button
C. Next button
8