10
INTERNAL CALLS (DISPLAY-TO-DISPLAY INTERCOM MODE)
The intercom mode allows two-way voice calls between two specific displays
in the video entry phone system. Touch
on the display on standby to call another
display in the system. If you have more than 2 displays in the video entry phone
system, choose the display you wish to call with
or . Next, touch
to confirm and make the call. The user at the display being called can touch
to answer the call or to reject the call.
DISPLAY SOUND VOLUME / BRIGHTNESS / COLOUR
/ CONTRAST / IMAGE TYPE CONTROL
Touch or in the monitoring, incoming call, voice call, intercom, or public
address mode to open the sound volume menu. Next, touch
to open
the Volume / Brightness / Colour / Contrast / Image Type menu. Operate
the controls with
or
.
DO NOT DISTURB MODE
You can enable or disable the DO NOT DISTURB mode in the display System
Settings menu. Touch and hold
to enable or disable this mode.
DISPLAY MICROPHONE MONITORING
With the display on standby, touch and hold
to start listening through
the microphone of another display in the voice entry phone system. If you have
more than 2 displays in the video entry phone system, choose the display you wish
to listen to by touching
or
and confirm with
.
Note:
a) The user of the display that is listening will hear everything that the microphone
of the display being listened to captures. The display being listened to will not
output the sounds captured by the microphone of the display which is listening.
b) If you have more than 2 displays in the video entry phone system, verify that
the remote listening mode is enabled in the display to which you want to listen.
Go to System Settings and verify that Can Be Monitored is set to Enable.
