11
SYSTEM SETTINGS
With the display on standby, touch
and open the System Settings menu.
Item
System functions
Options
Note
1
LANGUAGE
Default setting: PL (Polish) (optional: EN for English).
2
RING TIME
Default setting: 30 s (10 to 60 s, adjustable in 5 s steps).
3
RING VOLUME
Default setting: 0.7, adjustable in a 01-10 range. (00)
mutes the sound.
4
DO NOT DISTURB MODE
The mode is disabled by default during a call from
an entrance panel, display-to-display intercom (internal)
calls and the public address mode. The LED will flash
if this mode is enabled.
5
MONITORING
The mode is disabled by default. The monitoring
of remote display microphones can be enabled
in the System Settings.
6
MONITOR UNLOCK
Touch to unlock the electric catch linked
to the entrance panel. Touch
to open the gate linked
to the entrance panel.
7
DEVICE ADDRESS
Room 1 / 2 / 3 / 4
Choose ROOM 1
on the display that should
be the main (master)
display of the system.
The setting will be yellow
if the same device address
is set in two displays in the
video entry phone system.
8
RING TYPE
Door 1 Ring Type
Formats the embedded
flash memory of this display.
Door 2 Ring Type
Formats the embedded
flash memory of this display.
Intercomm Ring Type
Formats the embedded
flash memory of this display.
9
RING REPEAT
ENABLE
The ringtone will sound
repeatedly.
DISABLE
The ringtone will sound
once.
10
PORT STATE
None / CCTV1 / CCTV1&2
11
RESTORE DEFAULT
Restores the display unit settings to default values.
