background image

ROP-04

1 s 2 s n s

CAUTION! The adjusted time can not be deleted.

Wall lamps and standard LEDIX series LED fittings are connected to the ROP-04 receiver.  

4-channel button radio transmitter RNK-04 and a portable remote control P-257/4 cooper-

ate with the receiver. The wall lamps are switched on in time mode (staircase function) and  

LEDIX fittings in the switch on / switch of mode.

OPERATION

APPLICATION

MONOSTABLE

the relay operates only while pressing 

transmitter’s push-button.

BISTABLE

(one push-button) the device changes 

the relay status cyclically always after 

pressing the same push-button.

SWITCH ON

the device switches on after pressing the 

push-button.
SWITCH OFF

the device switches off after pressing the 

push-button.

TIME

the device switches off according to 

the adjusted time (tp), but it may be 

switched off before the adjusted time 

finishes. Default settings - 15 seconds.

TIME PROGRAMMING FOR A SELECTED CHANNEL

After the adjusted time is finished 

(the number of LED red diode 

flashes) press PROG push-button and 

then release it - TIME IS ADDED

Press PROG push-button of ROP-04 device and 

then release it. LED red diode switches off and then 

switches on (the signal pulsates).

Every LED diode pulse equals 1 second.

Maximum time is 18 hours hours for every channel.

The device can operate in five modes for every channel:

OPERATION TABLE

Symb

ol

RNK

-02

RNK

-04

P-256/8

P-257/2

P-257/4

RNM

-10

RNP

-01

RNP

-02

RNL

-01

RTN-01

RCR-01

RTI-01

RXM

-01

P-260

ROP

-04

200 200 250 200 200  250 180 180 180 200 180 180 250

-

CAUTION: The given range concerns open area - an ideal condition without any natural or arti-

ficial obstacles. If there are some obstacles between a transmitter and a receiver, it is advisable 

to decrease the range according to: bricks: from 10 to 40 %, wood and plaster: from 5 to 20 %, 

reinforced concrete: from 40 to 80 %, metal: from 90 to 100%, glass: from 10 to 20 %. Over- and 

underground medium and high electrical power lines, radio and television transmitters, GSM 

transmitters set close to a device system have also a negative influence on the range. 

Reviews: