www
.ledix.pl
3-channel
radio flush receiver
ROP-04
Cet Lighting Sp. z o.o.
PL 43-200 Pszczyna, ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
e-mail: [email protected], www.ledix.pl
10÷14 V DC / 0,22 W; IP20
weight: 25 g
Declaration of Conformity is on www.ledix.pl
3-channel radio flush receiver
ROP-04
The symbol means selective
collecting of electrical and electronic
equipment. It is forbidden to put
the used equipment together with
other waste.
ROP-04 receiver is designed to carry out simple control functions in LED diode systems sup-
plied with 10 ÷ 14 V DC. In connection with EXTA FREE system transmitters, it enables the re-
alisation of the switch on/switch off function, the monostable mode, the bistable and time
modes. ROP-04 has 3 independently controlled outputs realised on MOSFET transistors. The
outputs are designed for a direct connection of LED diode products.
Characteristic features:
• cooperation with wireless EXTA FREE system transmitters,
• independent control of up to three receivers in the following modes: switch on/switch off,
monostable, bistable, time,
• 3 MOSFET type transistor outputs with a maximum capacity of 2,5 A / output,
• possibility of a direct connection of 10 ÷ 14 V DC power supply LED products to the re-
ceiver’s outputs,
• wide operation range (up to 230 m outdoors),
• small dimensions - suitable for mounting in a typical Ø60 junction box,
• low power consumption in the standby mode (0,22 W) - the receiver is used to a continu-
ous operation.
Mounting in a Ø60
junction box
Mounting
indoor only
Co-operation
with EXTA FREE
transmitters
ROP-04 ENG Ver. 01
SCAN
the technical
data
10
÷
14 V DC
3-channel radio flush receiver
TYPE: ROP-04
A detailed moun
ting instruc
tion is in the pack
ag
ing
CET Lighting Sp. z o.o. declares that
the equipment complies with the principal
requirements and other applicable rules
of the RTTE Directive.
