10
EN
CABLE ENTRIES
ACQUEX LED-T8 are provided with one or several M20 or M25 entries. Before
connecting the power line unsure that every entry is dully fitted with an Ex certified
cable-gland or Ex certified plug.
WARNING – temporary transport plugs are not Ex certified plugs and must be remove
and replace by suitable entries before use.
MAINTENANCE AND OPERATION
The ACQUEx LED-T8 maintenance must be carried on by authorized and qualified persons
in accordance with the requirements of current standards, specifically EN 60079-17.
Due to potential electrostatic hazard ACQUEx LED-T8 luminaires must be periodically
cleaned using only a damp cloth to avoid formation of dust layer.
Any maintenance work inside the luminary, at exception of LED tubes replacement, is
not allowed and can only be carried out by the manufacturer.
To order spare parts, contact with ZALUX indicating the following references:
ORIGINAL SPARE PARTS REFERENCES
LED TUBE 10325495 - LM LED LEDV T8 EXT P 1200MM 15W 840 Ex
LED TUBE 10344035 - LM LED LEDV T8 EXT P 1500MM 23W 840 Ex
TRANSPORT AND STORAGE
Storage and transport of ACQUEx LED-T8 luminaires must be carried out in its original
boxes, in closed places free of humidity and far from any heat or light source. It is not
allowed to store luminaires in an open space, even if the boxes are protected with
plastic sheeting or similar systems.
ACQUEx LED-T8 luminaires should be stored horizontally in closed areas at a
temperature not lower than -5°C and not exc40°C away from heaters.
RECYCLING AND DISPOSAL
The symbol of a container of waste crossed out that appears on the
product indicates that it is subject to the provisions of the European
Directive 2012/19/EU (WEEE).
For more detailed information on product recycling, contact at contact
with the manufacturer, with a unit governmental local or with the
services of management of waste.
Summary of Contents for ACQUEx LED-T8
Page 19: ...19...
