13 Operation and Maintenance Manual
MQ-150 Ballscrew Feed Unit
Uploading a file
The same procedure is used to upload a file as is used to download a file. Simply
select the upload icon (up arrow to right) or select UPLOAD from the FILE pulldown
and continue the same as described in the DOWNLOADING section above.
Using the Zagar Servo Control Program with operator interface
The Zagar Servo Control Standard Program is designed to be used exclusively with
the Zagar operator interface keypad, part number 14-488-7. It forms a complete,
ready to run system capable of performing any of the machining operations the MQ-
150 is able to run. The program is self-explanatory and only requires a short period of
time to learn. A quick reference sheet is provided in the Appendix section. Use this
sheet to see the sub-menu structure of the Zagar program.
The operator interface is a keypad consisting of a backlit, 4 line by 20 character wide
display, six function keys and a numeric keypad. The screen provides all menu and
setup information. It prompts the operator for needed information during setup and
displays status and error conditions. The function keys are located above and below
the screen. This allows the screen to display the functions and sub-menus which can
then be selected with the corresponding function key above or below it.
The main program menu consists of two basic options - SETUP and REMOTE. The
SETUP menu branches into several sub-options for many setup and display functions.
The MAIN MENU is shown below in Figure 1.
Figure 1
