background image

18

GRATICAL EVF

Function Buttons

•  The Gratical has eight function  

buttons that can be assigned by  
the user. These include the four  
buttons (F1, F2, F3, F4) and the  
four directions of the joystick  
(UP, DOWN, LEFT RIGHT).  
Function buttons come  
preprogrammed but can be  
changed at any time.

 

•  To change the function assigned  

to each button, select the function  
button you wish to change.  
From the subsequent menu,  
choose the desired function  
you wish to be assigned to  
the function button. It can  
now be activated by pressing the appropriate function button  
on the side of the Gratical without the use of the menu system. 

•  Function buttons can only be used when the menu is not displayed.

Update

•  To update your Gratical with  

the latest firmware, first  
format your USB thumb drive  
to FAT32 for compatibility.

•  Download the firmware update 

from www.zacuto.com.

•  Insert your USB drive into the 

Gratical’s USB port, select  
UPDATE from the menu and 
select USB DRIVE. Select  
START UPDATE and follow  
the on screen instructions.  
The current firmware version  
can be confirmed in the  
ABOUT menu.

Summary of Contents for Gratical EVF























Reviews: