background image

 

 

 

 

Z3Stream User Instructions

 

 

 

 

DOC-USR-0090-04

 

 
 

___________________________________________________________________________________________ 

Z3 Technology, LLC 

 100 N 8

th

 ST, STE 250 

 Lincoln, NE 68508-1369 USA 

 Z3Stream.com 

52 

APPENDIX D:  Warranty 

 

EXPRESS LIMITED WARRANTY FOR Z3

Stream

TM

 VIDEO HARDWARE 

 

1.

 

Terms of Express Limited Warranty for Z3

Stream

 Video Products.

 Z3 Technology, LLC (“Z3”) warrants that it will 

repair  or  replace,  at  its  election  and  expense,  any  hardware  which  proves  to  have  a  defect  in  material  or 
workmanship.  Z3  further  warrants  that  the  hardware  will  perform  substantially  in  accordance  with  Z3’s 
specifications and related documentation for the hardware. This warranty does not cover software. The hardware is 
otherwise provided “as is.” Z3 makes no other warranties, express or implied or statutory, including warranties of 
merchantability, fitness for a particular purpose, accuracy or completeness. This Express Limited Warranty will be 
void  if:  the  label  on  the  hardware  bearing  the  Serial  Number  is  removed,  tampered  with  or  defaced;  if  the 
enclosure is opened; or the electronics are tampered with or subject to unauthorized repair. 

 

2.

 

Term Limitations of Express Limited Warranty.

 This warranty commences upon shipment of the hardware to the 

Purchaser and terminates [360] days thereafter. 

 

3.

 

Z3’s Responsibilities Under the Express Limited Warranty.

 Z3 shall be responsible for the repair or replacement, 

at  its  election,  of  covered  defective  hardware  and  all  reasonable  labor  required  to  effect  such  a  repair  or 
replacement  regarding  a  warranted  failure  during  the  express  limited  warranty  term.  All  such  labor  shall  be 
provided by Z3 or at Z3’s direction. 

 

4.

 

Purchaser’s  Responsibilities  Under  the  Express  Limited  Warranty. 

The  purchaser  of  the  hardware  shall  be 

responsible for: 

a.

 

The  installation,  use,  maintenance  and  operation  of  the  hardware  as  set  forth  in  the  specifications  and 
related documentation established by Z3 for the hardware; 

b.

 

Notifying Z3 of any covered claim under this limited warranty in writing within the warranty term set forth 
above. 

c.

 

Providing proof of purchase with a purchase date within the warranty term set forth above. 

d.

 

Making the hardware available to Z3 or at Z3’s direction for any covered warranty repair; 

e.

 

All direct and indirect costs incurred as the result of removal, repair or reinstallation of hardware as may 
be required to effect any warranted repair; 

f.

 

All administrative costs and expenses resulting from a warranted failure; 

g.

 

Shipping costs to return the hardware to Z3 with regard to a warranty claim; 

h.

 

Loss of revenue, loss of or damage to real and or personal property, and liability to third parties. 

 

5.

 

Limitation of Z3’s Obligations.

 Z3’s obligations under this express limited warranty shall be waived and voided in 

cases of: 

a.

 

Abuse,  misuse,  accident  or  neglect,  including  but  not  limited  to  any  operation,  installation,  storage, 
application or maintenance practice not in accordance with guidelines or specifications established by Z3; 
or 

b.

 

Modifications or repairs of the hardware not authorized by Z3; or 

c.

 

Failure to provide prompt notice to Z3 of a claimed defect; or 

d.

 

Failure to make the hardware available to Z3 or its authorized representatives; or 

e.

 

Normal wear and tear; 

f.

 

Damage that may occur in shipment through no fault of Z3. 

(Ref. DOC-ADM-0029-02) 

 

To submit a warranty claim, complete a Return Material Authorization (RMA) request form online at 

http://z3technology.com/Support/Report-RMA.html

. Your receipt with the original purchase and ship date is required for 

warranty coverage. 

 

Z3 Technology, LLC incorporates HDMI® technology. The terms of HDMI and HDMI High-Definition Multimedia Interface, and 

the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 

 

Summary of Contents for Z3Stream-01





















































Reviews: