42
CONFIDENTIAL
DOC-USR-0146-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Auto Refresh
If checked, causes the values in the status tab to be refreshed automatically once
every five seconds.
11.4
The MPTS Tab
*Note:
Upcoming release- Combine multiple streams into one TS stream.
11.5
The CH1/CH2/CH3 Tab (Encode)
Parameter
Options (default in bold) Notes
Video Info
Video Source
HDMI
Composite
In the default mode of “Encoder
Interlaced/Progressive”, this will be “HDMI” for
CH1 and “Composite” for CH2. For “Encode 1 to
3” mode, the user can select between “HDMI” or
“Composite” for CH1 (and CH2/CH3 will match
whatever is chosen for CH1).
16:9
Checked
Unchecked
For any SD resolutions (NTSC, PAL), checking this
forces the aspect ratio to be “16:9” in the output
(otherwise a default value of 4:3 is used). This
value is ignored for HD resolutions.
Video Resolution
320x180 – 1920x1080
(
1280x720
)
Follow Input
The encode resolution. If this resolution is
different from the capture resolution, resizing will
occur. “Follow Input” generates the resolution
based on the capture resolution. [
Note 1
]
Video Bitrate
100 – 12000K (
6000K
)
The bitrate.
Video Profile
High
Main
Baseline
The H.264 profile of the bitstream. Generally High
is used for 1080p, Main for D1, and Baseline for
<D1.
Frame Rate Divider
1
, 2, 4, 6
Used to encode at less than the input frame rate
(for example, an input frame rate of 30fps with a
divider of 2 would cause an output stream of
15fps). If interlaced input is used then this is used
to reduce the number of fields being encoded.
[Note 2]
Number of B-frames
0
– 2 (
0
)
The number of B-frames. A value of “0” means B-
frames are disabled.
