26
CONFIDENTIAL
DOC-USR-0054-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(11)
Leave the values for Display Mode, Resolution and Layout as-is (these define how the display
monitor is to be configured).
(12)
Click on the “CH1” tab. The configuration settings for the Decoder appear. Modify them so they are
identical to the settings below:
(13)
If you haven’t already, go back to the Encoder board and click “start”
(14)
The decoder then initializes the SDI. A few seconds later, decode should start and you should see a
picture / hear audio (note: if HDMI is used, up to 5 to 10 seconds might elapse before video
appears – this is due to the time needed to initialize the HDMI).
(15)
You can also view the content using VLC. Open VLC as you did in the Encode instructions and use
the address “udp://@225.1.2.3:5004” for the URL.
Figure 31 Decoder Settings for Decoding Example
