CONFIDENTIAL
DOC-USR-0030-12
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
41
9.0
EXERCISING OTHER FEATURES
Once you have the encoder running in Section 7.0 (and optionally, the decoder running in Section 8.0), you
can modify the options in the GUI to exercise other features. These include:
-Encoding from a second channel
-Adjusting input resolution
-Setting # of I/P/B frames
-Adjusting the frame rate
-Activating an optional noise filter
You can also store the configuration and store in the default or other files.
Serial menus can be used instead of the web-based GUI. More detailed system information can also be
gained from the options in the serial interface.
A command line interface called MCSENC is also available for running encode commands. This can be
invoked with the command:
#
source /opt/mcsenc/mcsenc.sh
This can be used to start a streaming encode session or to encode to a file on a connected USB drive or SATA
drive. A separate manual for MCSENC is available upon request.
The command line interface on the decode side, called MCSDEC, is also available. This can be invoked with
the command:
#
source /opt/mcsdec/mcsdec.sh
This can be used to play back raw video, raw audio, or ts files. A separate manual for MCSDEC is available
upon request.
