CONFIDENTIAL
DOC-USR-0030-12
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
20
(2)
Connect the supplied DB9 serial cable to your PC.
(3)
Connect the coaxial cable with the SDI input signal to “SDI Input 1” of the Z3-DM8107-APP-10
board.
(4)
Connect the Ethernet of the board to either your PC or a hub your PC is connected to.
The next step is to set up a terminal to view the activity of the board.
7.3
Set up the Terminal Window
(5)
If you are running from a Windows PC, run TeraTerm. Select “Setup – Serial Port” and set the
following:
Port:
The connected serial port
Baud Rate: 115200
Data:
8-bit
Parity:
None
Stop:
1-bit
Flow Control: None
(6)
If you are running from Linux, type:
# sudo minicom –s
And then configure by doing the following:
-Select “Serial Port Setup”
-Ensure the correct Serial Device is specified (typically “/dev/ttyS0”)
-Set option E (“Bps/Par/Bits”) to 115200 8N1
-Press <return>
-Select “Exit”
