19
HE4K-DCK-10
HARDWARE SPECIFICATION
CONFIDENTIAL
DOC-USR-0100-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
7.2
Main Encoder PCB
The Main Encoder PCB contains the core functionality of the H.265 encoder, including processor,
memories and power supplies.
This board connects to the Interface Front End PCB on the top side, via J7 connector, and to the I/O
Jack PCB on the bottom side, via J23, J25, J26 and J30.
The following interfaces are available:
7.2.1
J1 – JTAG Connector
Pin Signal
Pin Signal
1
TMS
2
TRST#
3
TDI
4
GND
5
+3.3V power
6
Key, N/C
7
TDO
8
GND
9
TCK
10 GND
11 RTCK, optional
12 GND
13 EMU0, optional
14 EMU1, optional
Table 9 Main Encoder PCB J1 Pin Out
7.2.2
J7 – Front End Interface
Pin Signal
Pin Signal
1
GND
2
SPI0_CSN_1V8 / GPIO5_6
3
MIPI0_D3M
4
SPI0_MISO_1V8 / GPIO5_5
5
MIPI0_D3P
6
SPI0_MOSI/I2C0_SDA_1V8 / GPIO5_4
7
GND
8
SPI0_SCLK/I2C0_SCL_1V8 / GPIO5_3
9
MIPI0_D1M
10 GND
11 MIPI0_D1P
12 SENSOR0_CLK_1V8 / GPIO1_4
13 GND
14 SENSOR0_RSTN_1V8 / GPIO1_5
15 MIPI0_D0M
16 N/C
17 MIPI0_D0P
18 SENSOR0_HS_1V8 / GPIO1_6
19 GND
20 SENSOR0_VS_1V8 / GPIO1_7
21 MIPI0_CKM
22 GND
23 MIPI0_CKP
24 N/C
25 GND
26 N/C
27 MIPI0_D2M
28 GND
29 MIPI0_D2P
30 +1.8V Power
31 GND
32 +1.8V Power
33 MIPI1_D3P
34 GND
35 MIPI1_D3P
36 N/C
