HE2K-DCK-10 User Instructions
DOC-USR-0122-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
11
5.0
GETTING STARTED WITH THE HE2K-DCK-10
Note:
Some GUI images may reference the Z3Cam-4k, functionality and interface is otherwise the same.
Figure 4 HE2K-DCK-10 Physical Block Diagram (Camera Not Included)
If you have received an HE2K-DCK-10 assembly, you will need to connect it to the Sony FCB-EV7520 camera
block. The Interface Front End PCB of the HE2K-DCK-10 assembly (see
) has a 30-pin KEL connector
that allows a flexible ribbon cable to be used to connect the encoder assembly to an identical connector on
the Sony FCB- EV7520.
The KEL cable is sold separately (ordering part number: CBL-0025-01).
WARNING: ONLY USE THE CORRECT KEL RIBBON CABLE PROVIDED BY Z3 TECHNOLOGY.
Using an incorrect cable can permanently damage the camera body.
Sony FCB
EV7520
(Not Included)
KEL Ribbon Cable
(Sold Separately)
