HE2K-DCK-10 User Instructions
DOC-USR-0122-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
61
Half
Quarter
Sixth
(for example, an input frame rate of 30fps with
Half
selected would cause an output stream of
15fps). If interlaced input is used then this is used
to reduce the number of fields being encoded.
GOP Size
*
10 – 240 Frames
(
60 Frames
)
I-frame frequency. The number of frames in each
Group of Pictures (GOP)
Audio Enable
True
False
Select
True
to enable encode of audio from the
powered/amplified microphone jack.
Audio Setup (if Audio Enable is set to True)
Codec
ARM AACLC
ARM AACLC MPEG2
ARM AACHE
ARM AACHE V2
Codec to be used for audio encode.
Sample Rate
48000 Hz
44100 Hz
32000 Hz
16000 Hz
Sample rate of audio.
Bit Rate
12 – 384 Kbps
(128 Kbps)
Target bitrate for audio encode.
The bitrate range for AACLC is 12-384 Kbps (though
64 Kbps or higher is recommended for best results).
The bitrate range for AACHE and AACHE V2 is 32 –
64 Kbps.
Source
MIC Line-In
MIC
Select
MIC Line-In
when using a non-powered/non-
amplified microphone.
Select
MIC
when using a powered/amplified
microphone.
Rtp Port (RTP Only)
0 – 9999 (
8700
)
Destination port for RTP audio.
Pid
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191
(120)
Audio PID for transport stream.
Max PTS-PCR
*
(UDP/TSRTP/TSFILE
0 – 8191
(250)
Maximum difference between the PTS and PCR in
the audio stream. It is generally recommended to
