FV4K-1XA User Guide
DOC-USR-0268-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
53
(6)
Remember, you may need to close and restart your camera controller application for changes to take
effect.
If you do not have camera control software it is possible to write your own. An example application
for sending VISCA commands from a Windows PC to the FV4K-1XA has been provided in APPENDIX C:
Example Camera Controller Application.
7.8
ONVIF
Profile S & T
FV4K-1XA software is compliant with ONVIF Profile S and T.
5
ONVIF is enabled by default. ONVIF Clients should be able to discover the FV4K-1XA using WS-Discovery.
(1)
Open your ONVIF client program.
(2)
Use ONVIF device discovery to find the FV4K-1XA on the network.
Note:
For manual discovery of ONVIF, use the FV4K-1XA IP address and the port
8080
as shown in the following
URL example: http://192.168.0.120:8080/onvif/device_service
(3)
Enter your valid user ID and password.
Note:
If you are logging onto the camera for the first time, the default user ID is
admin
and the default password
5
ONVIF promotes standardized interfaces for interoperability of IP-based security products. For more information, visit
Figure 50 Camera Controller Software Configuration
Com2TCP
Camera Control Software
Match Values
Set to
“9600kbps”
