FV4K-1XA User Guide
DOC-USR-0268-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
31
6.4.2
RTMP Camera Streaming to YouTube Live
(1)
If you have not already done so, verify you have set up a YouTube live account and access your
YouTube live dashboard. (As of the date of this document, the dashboard URL is:
https://www.youtube.com/live_dashboard)
(2)
Under Encoder Setup, locate your
Server URL
and
Stream name/key
.
(3)
Return to the encoder user interface CH1 tab and, if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right
corner of the screen of any tab.
(4)
Verify the
Output Resolution
is set to
1920x1080
. If a lower resolution output is desired, select this
in the dropdown menu and resizing will occur.
(5)
Set the
Video Codec
to
H264(AVC)
for RTMP streaming.
(6)
Under Output Setup, select
RTMP
in the
Output Format
dropdown menu.
(7)
Set Dest Address to
“
Server_URL/Stream_Key
”.
a.
Server_URL
will be the value specified in your YouTube Live dashboard.
Omit the RTMP
protocol “rtmp://” and enter “a.rtmp.youtube.com/live2”.
b.
Stream_Key
will be the value specified in your YouTube Live dashboard.
(8)
It is recommended to set
Video Rate Control
to
CBR
.
(9)
It is recommended to set
GOP Size
to:
a.
120 Frames
–
240 Frames for 60 fps content.
b.
60 Frames
–
120 Frames for 30 fps content.
Note:
By default, a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings including Video Rate
Figure 22 YouTube Live Dashboard – Encoder Setup
