Z3-DME-01 V1.06.03
8
5.0
SYSTEM CONNECTIONS
The System can be controlled via the Web Server on the Z3-DME-01. It can also be controlled via the serial
port.
5.1 PC SETUP
Initially, the simplest way to setup the networked PC to communicate with the Z3-DME-01 is to put the PC
on the same subnet as the Z3-DME-01. The IP address of the Z3-DME-01 can be found on the bottom side of
the Z3-DME-01. The Windows PC can be setup on the same subnet by using these parameters:
NOTE: The static IP of the computer cannot be the same as the static IP of the Z3-
DME-01
Microsoft Windows users
1. Go to the Start Menu and select
Control Panel
2. Click on Network and Sharing Center
3. Click on View Status
4. Click on Properties.
5. Click Internet Protocol (TCP/IP) and
click Properties.
6.
In the Internet Protocol (TCP/IP)
Properties window, select "Use the
following IP address" if not already
selected and specify the IP address
you wish to use. While entering this
data you'll also need to specify the
subnet mask and default gateway.
Linux users
The below information is for how to specify
and adjust your network settings through the
command prompt.
Changing your network
settings will require root access.
1. Get to the command prompt.
2. Move to the /etc/sysconfig/network
directory.
3. Edit the interfaces file and adjust your
network settings in this file.
_________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
