Z3-DME-01 V1.06.03
18
9.0
UPDATING FIRMWARE
9.1 WEB PAGE
-
Locate the UPD-z3-dme-vx.xx.xx.img file on your Z3 Server user account
-
Save the file on your PC where it can easily be found
-
Follow steps 1 through 7 in section
6.2 WEB SERVER - ENCODER
-
On the web menu, next to “Firmware Version x.xx.xx”, hit the Update button
-
Hit Browse to find the saved .img file on your PC
-
Hit Upload & Update
-
Power off unit
-
Power cycle system for clean boot and system should be updated.
9.2 SD CARD
-
Locate the UPD-z3-dme-vx.xx.xx.img file on your Z3 Server user account
-
Place SD card into computer
-
Open the zwriter.exe windows program (provided by Z3)
-
Select the UPD-z3-dme-vx.xx.xx.img file
-
Select correct location for your SD card Do NOT make mistake on this item. This will cause wherever
you are writing to be overwritten.
There is no recovery once you hit “Write Device”
-
Eject SD card from computer
-
Place in SD card socket of APP board
-
Power on system with terminal output connected to PC
-
You will see the system updating the flash
-
Once complete, the system will boot.
-
Power off unit
-
Remove SD card
-
Power cycle system for clean boot and system should be updated.
_________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
