background image

7

•  The temperature of the airflow for breathing produced by CPAP devices can be higher than 

the temperature of the room. This is true of all CPAP devices. Caution should be exercised 
when using your 

Z1

 at room temperatures warmer than 90˚F (32˚C).

•  Only operate the 

Z1

 and accessories within the operating temperature, humidity and 

altitude conditions specified in the Technical Specifications section of this User Guide.

•  Only store or transport the Z1 and accessories within the storage and transport 

temperature, humidity and altitude conditions specified in the Technical Specifications 
section of this User Guide.

•  Damage to the 

CPAP Tube

 may result in air leaks. If this occurs, stop using the damaged 

CPAP Tube

 and replace immediately.

Battery Warnings and Cautions

The 

PowerShell

 comes with a removable 

Lithium Ion Battery

.  Careful attention must be paid to 

the warnings and cautions described below relating to the 

Battery

.  Misusing the 

Battery

 may 

cause the 

Battery

 to get hot, rupture, ignite and cause serious injury.

 

WARNINGS: 

•  Do not place the 

Battery

 in fire or heat the 

Battery

.

•  Do not install the 

Battery

 backwards so that the polarity is reversed.

•  Do not connect the positive terminal and the negative terminal of the 

Battery

 to each other 

with any metal object (such as wire).

•  Do not carry or store the 

Battery

 together with necklaces, hairpins, or other metal objects.

•  Do not pierce the 

Battery

 with nails, strike the 

Battery

 with a hammer, step on the 

Battery

 or 

otherwise subject it to strong impacts or shocks.

•  Do not solder onto the 

Battery

.

•  Do not expose the 

Battery

 to water or salt water, or allow the 

Battery

 to get wet.

•  Do not disassemble or modify the 

Battery

. The 

Battery

 contains safety and protection 

devices which, if damaged, may cause the 

Battery

 to generate heat, rupture or ignite.

•  Do not place the 

Battery

 on or near fires, stoves or other high-temperature locations. Do not 

place the 

Battery

 in direct sunlight, or use or store the 

Battery

 inside cars in hot weather. 

Doing so may cause the 

Battery

 to generate heat, rupture or ignite. Using the 

Battery

 in this 

manner may also result in a loss of performance and a shortened life expectancy.

•  Immediately discontinue use of the 

Battery

 if, while using, charging or storing the 

Battery

the 

Battery

 emits an unusual smell, feels hot, changes color, changes shape or appears 

abnormal in any other way. Contact the Human Design Medical Service Center at 1-855-
436-8729 [1-855-HDMUSA9] if any of these problems are observed.

•  Do not place the 

Battery

 in microwave ovens, high-pressure containers, or on induction 

cookware.

Summary of Contents for CPAP System































Reviews: