17
Care
The
Z1
System
needs periodic care. It is the user’s responsibility to be aware of the following items
for care:
• Inspections
• Cleaning
•
Filter
Replacement
•
CPAP Tube
Replacement
• Reminders and Fault Conditions
Inspections
Before each use carefully inspect the
Z1
,
CPAP Tube
,
Filter
, and mask for signs of wear, damage
or discoloration. Contact Human Design Medical for replacement parts at 1-855-436-8724
[1-855-HDMUSA4] or online at www.hdmusa.com.
Cleaning
Regular cleaning should be performed in accordance with the instructions below.
WARNING:
This device can expose you to electrocution. Do not
immerse the
Z1
,
Power Adapter, Power Cord
or
Battery
in water. Always
unplug these devices before cleaning (only as instructed in this User Guide)
and make sure they are dry before plugging back in.
CAUTION:
Do not use bleach, chlorine, alcohol, or aromatic-based
solutions, moisturizing or antibacterial soaps or scented oils to clean the
Z1
. Never attempt to clean the
Power Adapter, PowerShell, Battery
or
accessories with any of these solutions. These solutions may create a shock
hazard, cause damage and reduce the life of these products.
Daily
1. Remove the
CPAP Tube
and the mask from the
Z1
.
2. Refer to the instructions for cleaning, maintenance and replacement provided with
your
CPAP Tube
and mask.
3. Before next use, reconnect the
CPAP Tube
and the
Tube Adapter
to the
Z1
and mask.
Weekly
1. Remove the
CPAP Tube
,
Tube Adapter
and mask from the
Z1
. Wash the
Tube Adapter
in warm water using a mild detergent. Rinse thoroughly and allow to dry.
Refer to the manufacturer’s instructions for cleaning the
CPAP Tube
and mask.
2. Before next use, reconnect the
CPAP Tube
to the
Tube Adapter
and then to the
Z1
and
mask.