5
Z1
and its accessories before cleaning (and clean only as instructed in this User Guide)
and make sure your
Z1
and its accessories are dry before plugging back in.
• Before use, make sure the power cord and plug are in good condition and that the
cord is not damaged.
• Do not use bleach, chlorine, alcohol, or aromatic-based solutions, moisturizing or
antibacterial soaps or scented oils to clean your
Z1
,
Power Supply, PowerShell
or
Battery
. These solutions may create a shock hazard, cause damage and reduce the life
of these items.
•
Explosion Hazard
— Do not use or store your
Z1
,
Power Supply
,
PowerShell
or
Battery
in the vicinity of flammable anesthetics or oxygen.
• Do not use your
Z1
near toxic or harmful vapors.
• Do not drop your
Z1
or any of its accessories or expose it to any crushing forces.
Should your
Z1
be dropped and fail to operate properly, contact the Human Design
Medical Service Center at 1-855-436-8729 [1-855-HDMUSA9] before using the
Z1
for
treatment.
• Do not insert any object into any tubing or opening of your
Z1
except as described in
this User Guide.
• Do not operate your
Z1
in any area which may block its air intake. Blocking the
CPAP
Tube
and/or air inlet of your
Z1
while in operation could lead to overheating of the
Z1
.
• If you put the
Z1
on the floor, make sure the area is free from dust and clear of
bedding, clothes or other objects that could block the air inlet or cover the
Power
Supply
unit.
• Only store or transport the
Z1
and accessories within the storage and transport
temperature, humidity and altitude conditions specified in the Technical
Specifications section of this User Guide.
• Do not operate your
Z1
,
Power Supply
,
PowerShell
or
Battery
in an area which may
cause overheating.
• Do not cover the
Power Supply
,
PowerShell
or
Battery
with any object or material
which would cause them to overheat.
• Keep the power cord,
Power Supply, Battery
and
Z1
away from hot or flammable
surfaces, gases or materials.
• Do not open your
Z1
or tamper with its accessories. There are no user serviceable
parts inside. Repairs and servicing should only be performed by an authorized Human
Design Medical service agent.
• Only power the
Z1
with the Human Design Medical
Power Supply
(AC-to-DC power
adapter, HD60-6010) or the optional Human Design Medical
PowerShell
with Human
Design Medical
Battery
. Do not use any other AC adapters, batteries, or other power
sources to power the
Z1
. Do not use the Human Design Medical
Power Supply
,
PowerShell
or
Battery
to power any device other than the
Z1
.